YR J2IB (A)
Induction Hard Chrome Plated Rod SUJ-2
| High carbon steel rod with material of: JIS SUJ2 / DIN 100Cr6 / ASTM E52100. Through heat treatment, the hardness is higher than common hardening chromium plated bar. Induction chrome shaft reaches uniform hardening thickness with no soft spots. It has high stability, low ductility, good abrasion proof, small deformation and long working life. For mechanical guide rod, column tie bar, linear guide, slide rod, sport equipment, forklift, scraper and so on. |
Specification
| Dia mm | 6 | 8 | 10 | 15 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 60 |
| Tolerance μm | -5 -14 |
-5 -14 |
-5 -14 |
-6 -17 |
-7 -20 |
-7 -20 |
-7 -20 |
-9 -25 |
-9 -25 |
-9 -25 |
-9 -25 |
-10 -29 |
| Hardening Depth | 1.0mm up | 1.5mm up | 2.0mm up | 2.5mm up | 3.0mm up | |||||||
| Standard Length | 2000~3500mm | 6000mm | ||||||||||
Detail
Size： Ø 6~60mm
Length： 2~7M
Induction Hardness： HRC 62 ± 2°
Hard Chrome Thickness：15Micron ± 5
Surface Roughness： Ra0.2~Ra0.4
OD Accuracy： g6
Application
Hydraulic cylinder
Pneumatic cylinder
Precise machine pipes
Agriculture machine
Boiler construction
Machinery :
Stamping machine
Punching machine
Blow molding machine
Plastic injection machine
Food machine
Forklift
Automobiles:
Crane
Truck
Truck lifter
Shock absorber of car, motorcycle, bicycle
Furniture: gas spring
Sport equipments
Medical equipments
Door closer
Jack
Linear guides rod, guide-pillar, shaft of bearing, column rod.
Material
| Material No. | Similar International Grade | Suitable for… |
| 1.3505 | DIN 100Cr6 / CNS SUJ2 / GB GCr15 / BS 535A99 / EN 34A99 / NF 100Cr6 / UNI 100Cr / NBN100CR6 / UNE F131 / JIS SUJ2 / ASTM E52100 / SS SKF1 / ISO 100Cr6 | Good wear-resistance and high hardness degree High stability & low deformation Without soft points after induction heat treatment Suitable for rolling bearing |
★ You may order induction ground bars under this material.
★ Other specification and material can be ordered.
