WORLDWIDE
Home / Product Line
linear shaft CF53 and SUJ2 for Hiwin, PMI and THK
We are a leading manufacturer of luxurious Hydraulic and Pneumatic Cylinder Rodand a range of superior quality relative Induction Harden Chrome Plated Cylinder Rod accessories.
YR 53IB
Induction Hard Chrome Plated Rod CF53
| Material of the Europeanization carbon steel chrome plated bar: JIS S50C / DIN CF53 / AISI 1050 and JIS S55C. Through heat treatment, the hardness is greater than common harden chrome plated rod. Induction Harden Chrome Plated Cylinder Rod reaches uniform hardening thickness with no soft spots. It has high stability, low ductility, and superior wear resistance for mechanical guide rod, tie bar, linear bearing slide rod, excavator, loading machine, construction equipment. |
Specification :
| Dia mm |
6 | 7 | 8 | 10 | 12 | 16 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 60 | 65 | 70 | ||||
|
Tolerance
μm |
-5 -14 |
-5 -14 |
-5 -14 |
-5 -14 |
-6 -17 |
-6 -17 |
-7 -20 |
-7 -20 |
-7 -20 |
-9 -25 |
-9 -25 |
-9 -25 |
-9 -25 |
-10 -29 |
-10 -29 |
-10 -29 |
||||
|
Hardening Depth
|
1.0mm up | 1.5mm up | 2.0mm up | 2.5mm up | 3.0mm up | |||||||||||||||
|
Standard Length
|
2000~3500mm | 6000mm up | ||||||||||||||||||
Detail :
Size： Ø 5~90mm
Length： 2000~6500mm
Induction Hardness： HRC 60± 2°
Hard Chrome Thickness： 15Micron±5
Surface Roughness： Ra0.2 ~ Ra0.4
OD Accuracy： g6
Application :
Hydraulic cylinder
Pneumatic cylinder
Precise machine pipes
Agriculture machine
Boiler construction
Machinery :
Stamping machine
Punching machine
Blow molding machine
Plastic injection machine
Food machine
Forklift
Automobiles:
Crane
Truck
Truck lifter
Shock absorber of car, motorcycle, bicycle
Furniture: gas spring
Sport equipments
Medical equipments
Door closer
Jack
Linear guides rod, guide-pillar, shaft of bearing, column bar.
Material :
| Material No. | Similar International Grade | Suitable for… |
| 1.1213 | DIN CF53 / GB 50 / BS 060A52 / NF XC48TS / UNI C53 / NBN C53 / SS1674 / JIS S50C / AISI 1050 / ISO G50E4 | Good wear-resistance and high hardness degree High stability & low deformation Without soft points after induction heat treatment Suitable for rolling bearing |
| 1.1203 | DIN CK55 / CNS S55C / GB 55 / BS 070M55 (1C45) (060M57) / UNI XC45 / NBN C50 / SS 55-2 / UNE C55K / AISI 1055 / ISO C55E4 |
★ You may order bright rods, ground rods, induction ground rods under this material.
★ Other specification and material can be ordered.
Please feel free to contact us if you are looking for a reliableHydraulic Piston Rod Manufacturer.